VCC-G20X30B Rev. 900-731-31-00
©2012 CIS Corporation. All rights reserved.
10
Exposure Period
768H
External HD
WEN Output
28H
External VD
(1V min)
Video Output
1H
(Full Frame)
Table of Settings
Operational mode
Function
Normal
Shutter
mode
Restart Reset
mode
Fixed & Pulse
width trigger
shutter mode
(SYNC reset)
Fixed & Pulse width
trigger shutter mode
(SYNC non reset)
Shutter speed set by fixed
switch.
○ × ○ ○
Shutter speed set by trigger
pulse width.
× × ○ ○
Full frame scan mode ○ ○ ○ ○
Binning scan mode ○ ○ ○ ○
1/2, 1/4 partial scan mode ○ ○ ○ ○
HD/VD Input ○ ○ ○HD ○
HD/VD Output ○ × ○ ×
Normal Shutter Mode
Video outputs are read out consecutively. With shutter function, clear image of the rapidly moving
object can be captured. When adding external sync input, please follow the external HD/VD input
conditions shown below.
Restart-Reset Mode
With adding EXT VD input at random timing with over 1 VD, and adding external HD input, data for one screen image is
read out. This function is useful when sensitivity with regular exposure time is not sufficient or when indicating the locus
of moving object.
To Next Page
Loading...