CIS VCC-G20X30B - Function Settings; Shutter Speed and Mode Settings; Scan Mode Settings

VCC-G20X30B Rev. 900-731-31-00
©2012 CIS Corporation. All rights reserved.
9
5. Function Settings
1
●
ES2 ◇Shutter speed 8 steps
OFF(1/30) or 1/60 ～ 1/10000s
Trigger pulse width : 9μs ～ 250ms
2
●
ES1
3
●
ES0
4
●
Binning
◇Binning Scan mode ON/OFF
5
●
Mode2 ◇Shutter mode
Normal Shutter mode, Restart Reset mode, and Trigger Shutter mode
6
●
Mode1
7
●
Mode0
8
●
75ohm
◇HD/VD Input impedance 10kΩ/75Ω
9
●
Partial
◇Partial Scan mode ON/OFF
10
●
IN/OUT ◇HD/VD Input/Output
↑
OFF
● indicates initial setting.
Shutter speed settings
ES2 ES1 ES0 Shutter speed Actual Time
SW1 SW2 SW3
Normal
Shutter
mode
T
ri
gg
er
Shutter
mode
OFF OFF OFF
OFF(1/30s) 33.3 ms
Or 1/60s 17.0 ms
OFF OFF ON 1/125 s 8.0 ms 8.1 ms
OFF ON OFF 1/250 s 4.0 ms 4.1 ms
OFF ON ON 1/500 s 2.0 ms 2.0 ms
ON OFF OFF 1/1000 s 996μs1.0 ms
ON OFF ON 1/2000 s 489μs 505μs
ON ON OFF 1/4000 s 236μs 248μs
ON ON ON 1/10000 s 110μs 118μs
※ At trigger shutter mode, shutter speed can be set by triggerpulse width.
Indicates initial setting position.
Shutter mode settings
Mode2 Mode1 Mode0 Setting mode
SW5 SW6 SW7
OFF OFF OFF
Normal shutter mode
OFF ON ON Restart reset mode
ON OFF OFF Fixed trigger shutter mode (SYNC reset mode)
ON OFF ON Fixed trigger shutter mode (SYNC non reset mode)
ON ON OFF Pulse width trigger shutter mode (SYNC reset mode)
ON ON ON Pulse width trigger shutter mode (SYNC non reset mode)
※ Do not set other than the above settings.
Indicates initial setting position.
