Cisco MERAKI MS250 Series User Manual

Rack Mount Kit includes:
• US 12-24 mounting screws and cage nuts, 5 of each
• INTL M5 mounting screws and cage nuts, 5 of each
• INTL M6 mounting screws and cage nuts, 5 of each
• Mounting washers
MS250-24 Series front panel
MS250-48 Series front panel
Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash
twice. Additional functions are described below, from left to right.
Item Function LED Status Meaning
1 Power Solid orange Switch is unable to connect to the Meraki cloud
Flashing white Firmware upgrade in process
Solid white Switch is fully operational and connected to the Meraki cloud
Note: MS250 does not include stacking cables. Stacking cables sold separately.
If using a 640WAC or 1025WAC power supply, it will require to use a C15 power cable.
2

Cisco MERAKI MS250 Series Specifications

General

Model	MS250 Series
Series	MS250
Form Factor	Rack-mountable
DRAM	2 GB
Flash Memory	4 GB
Input Voltage	100 - 240 VAC
Operating Temperature	0°C to 40°C
Humidity	5% to 95% non-condensing
Ports	24 or 48 Gigabit Ethernet
Uplink Interfaces	4 x 10G SFP+
Switching Capacity	176 Gbps
Forwarding Rate	130.95 Mpps
Power Supply	Internal
Stacking	Yes
Layer	Layer 2 and Layer 3
Product Type	Switch
PoE	PoE+
PoE Budget	740W
Management	Cloud-managed
Storage Temperature	-20°C to 60°C
Warranty	Lifetime hardware warranty