Cisco MERAKI MX250 - Ports and Status Indicators; Power Status LEDs; USB Connectivity LEDs; HA Status LEDs

Ports and Status Indicators
The MX250 uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash
twice. Additional functions are described below, from left to right.
Item Function LED Status Meaning
1 Power Solid orange Power is applied
Shifting colors
Unit is attempting to
contact the Cloud
Flashing white Operation is in progress
Solid white Fully operational
2 USB connectivity Off During boot or USB link
Solid orange Initial link
Flashing orange
Internet connectivity not
complete
Green USB connection detected
3 HA status Off No HA available
Orange Initial link
Flashing orange
High availability not
complete
Green HA available
MX250 Back Panel
Please note that the serial number is located on the product label at the back panel of the MX250-HW.
Reset button
Insert a paper clip if a reset is required.
A brief, momentary press: To delete a downloaded configuration and reboot.
Press and hold for more than 10 seconds: To force the unit into a full factory reset.
2