1
Cisco Systems, Inc. www.cisco.com
Introducing the Cisco 1121 Secure Access
Control System Hardware
This chapter gives an overview of the Cisco Secure Access Control System (CSACS-1121) hardware. It covers the
appliance hardware, major components, controls, connectors, and front- and rear-panel LED indicators.
This chapter contains:
Product Overview, page 1
Hardware Features, page 3
Regulatory Compliance, page 7
Product Overview
This section describes the power requirements, rack-mount hardware kit, and features of the CSACS-1121 Series
appliance.
This section contains:
CSACS-1121 Series Appliance Overview, page 1
Product Serial Number Location, page 2
Cisco Product Identification Tool, page 3
CSACS-1121 Series Appliance Overview
The CSACS-1121 Series appliance (see Figure 1 on page 1) is contained in a standard shelf-rack enclosure. The
appliance weighs from 24.25 lb (11.0 kg) to 28.0 lb (12.7 kg). It measures 1.75 inches high x 17.3 inches wide x
22.0 inches deep (44.5 mm x 440.0 mm x 559.0 mm). These dimensions do not include the rack handles.
Figure 1 Cisco 1121 Secure Access Control System Front View
The CSACS-1121 Series appliance is configured for AC-input power and has a single auto-ranging AC-input power
supply, mounted in a standard 19-inch (48.3 cm), 4-post equipment rack (using the rack-mount brackets provided). The
CSACS-1121 features include:
Microprocessor—Intel Core 2 Duo 2.4-GHz processor with an 800-MHz front side bus (FSB) and 2 MB of Layer 2
cache.
Four synchronous dynamic RAM (SDRAM) slots that are installed with 4 GB.
195212
Cisco 1121 Secure
Accrss Control System
CISCO
To Next Page
Need help?
General
