EasyManuals Logo

Cisco 1811 User Manual

Cisco 1811
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Complete the information below, and keep it for reference.
2 Overview
This document describes the steps for installing the Cisco 1811 and the Cisco 1812 integrated services routers. The Cisco 1811
and Cisco 1812 routers are fixed-configuration routers. They each include an integrated 8-port 10/100-Mbps Ethernet switch,
two onboard Fast Ethernet WAN ports, two dual USB 2.0 ports, and optional 802.11a/b/g wireless LAN support. The switch
ports and the onboard 10/100-Mbps Ethernet ports support 802.1Q virtual LAN (VLAN) encapsulation and enable you to
configure demilitarized zones (DMZs), using VLANs and Cisco IOS firewall features. The switch ports are also optionally
upgradable to include inline power support for IP phones.
The Cisco 1811 and Cisco 1812 integrated services routers provide secure Internet connectivity and dial backup if your primary
connection fails. The Cisco 1811
router provides dial backup through a V.92 analog modem port. The Cisco 1812 router
provides dial backup through an ISDN S/T port.
Additional documentation can be found on Cisco.com.
Product Serial Number Location
The serial number label for the Cisco 1811 and Cisco 1812 routers is located on the back of the chassis, above and to the right
of the power switch. You need this serial number when calling Cisco for support. To see specifically where the serial label is on
your router, go to the following link:
http://tools.cisco.com/Support/CPI/index.do
3 Unpacking the Box
When you unpack the box containing your Cisco 1811 or Cisco 1812 router, you should find the items shown in Figure 1.
Note The Cisco 1811 and Cisco 1812 routers have a wireless upgradable option. If this option is chosen, an antenna kit
should have been shipped with your router in addition to the items listed in Figure 1.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1811 and is the answer not in the manual?

Cisco 1811 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
I/O ports8 x 10/100BASE-T\\r 2 x 10/100 Base-T WAN\\r 2 x USB
Form factor1U
xDSL connectionNo
USB ports quantity2
SafetyUL 60950, CAN/CSA C22.2 No. 60950, IEC 60950-1, EN 60950-1, AS/NZS 60950
Flash memory32 MB
Internal memory128 MB
Storage temperature (T-T)-25 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP client-
Firewall securityCisco IOS
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, AES, DES, EAP-FAST, LEAP, WEP, WPA, WPA2
Product colorBlack, Blue, Stainless steel
Weight and Dimensions IconWeight and Dimensions
Depth246.4 mm
Width323.6 mm
Height48 mm
Weight2800 g

Related product manuals