C-17
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Appendix C Using ROM Monitor
How to Use the ROM Monitor—Typical Tasks
SUMMARY STEPS
1. IP_ADDRESS=ip_address
2. IP_SUBNET_MASK=ip_address
3. DEFAULT_GATEWAY=ip_address
4. TFTP_SERVER=ip_address
5. TFTP_FILE=[directory-path/]filename
6. GE_PORT=[0 | 1 | 2]
7. GE_SPEED_MODE=[0 | 1 | 2 | 3 | 4 | 5]
8. TFTP_MEDIA_TYPE=[0 | 1]
9. TFTP_CHECKSUM=[0 | 1]
10. TFTP_DESTINATION=[flash0: | flash1: | usbflash0: | usbflash1:]
11. TFTP_MACADDR=MAC_address
12. TFTP_RETRY_COUNT=retry_times
13. TFTP_TIMEOUT=time
14. TFTP_VERBOSE=setting
15. set
16. tftpdnld [-h] [-r]
17. y
DETAILED STEPS
Command or Action Purpose
Step 1
IP_ADDRESS=ip_address
Example:
rommon > IP_ADDRESS=172.16.23.32
Sets the IP address of the router.
Step 2
IP_SUBNET_MASK=ip_address
Example:
rommon > IP_SUBNET_MASK=255.255.255.224
Sets the subnet mask of the router.
Step 3
DEFAULT_GATEWAY=ip_address
Example:
rommon > DEFAULT_GATEWAY=172.16.23.40
Sets the default gateway of the router.
Step 4
TFTP_SERVER=ip_address
Example:
rommon > TFTP_SERVER=172.16.23.33
Sets the TFTP server from which the software is
downloaded.
To Next Page
Loading...
Need help?
General
