7
Installation
Step 3 Connect the Token Ring port to the network as shown in Figure 4.
Figure 4 Token Ring Cable Connections
Step 4 Connect the serial ports to the network as shown in Figure 5.
Figure 5 Serial Cable Connections
Step 5 Connect the console and auxiliary ports as required for your method of
configuration. Your terminal should be configured for 9600 baud, 8 data bits,
no parity, and 1 stop bits.
Step 6 Connect the power cable between the router and the AC source.
Router
(top view)
DB-9 Token Ring
port connector
H1904
Media
attachment
unit
(MAU)
Back
Standard
IEEE 802.5
connector Token Ring lobe cable
(not supplied)
Modem
or
CSU/DSU
H1905
Router
(top view)
Serial transition cable
EIA/TIA-232, EIA/TIA-449,V.35,
X.21, or EIA-530 connector
Serial port connector
Rear
To Next Page
Loading...
