Cisco 3000 Series Regulatory Compliance And Safety Information

Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Regulatory Compliance and Safety Information
for the Cisco Catalyst Blade Switch
3000 Series for Dell
Read this document before installing or servicing the Cisco Catalyst Blade Switch 3000 Series for Dell.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This document includes the following sections:
• Translated Safety Warnings, page 2
• European Directives, page 24
• Regulatory Standards Compliance, page 25
• EMC Environmental Conditions for Products Installed in the European Union, page 27
• EMC Class A Notices and Warnings, page 27
• Related Documentation, page 31
• Obtaining Documentation, Obtaining Support, and Security Guidelines, page 31

Cisco 3000 Series Specifications

General

Model	Cisco 3000 Series
Ports	Varies by model
Switching Capacity	Up to 176 Gbps
Power Supply	Internal or external, varies by model
Layer Support	Layer 2 and Layer 3
Power over Ethernet	PoE or PoE+
Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45°C (32° to 113°F)
Operating Humidity	10% to 85% non-condensing
Uplink Interfaces	Optional 1G/10G SFP/SFP+ or 10GBase-T