Cisco 3000 Series Regulatory Compliance And Safety Information

26
Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3000 Series for Dell
78-17053-02
Regulatory Standards Compliance
For specific details about the years, revisions and relevant amendments please refer to the applicable
declaration of conformity available at http://www.cisco.com.
The Cisco Catalyst Blade Switch 3000 Series for Dell meets the industry EMC, safety, and
environmental standards described in Table 2.
EMC 47CFR Part 15 (FCC) Class A
AS/NZS 3548 Class A
AS/NZS CISPR22 Class A
CISPR22 Class A
CNS13438 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
EN50082-1
EN50082-2
EN61000-6-1
EN61000-6-2
EN55024
EN300386
EN61000-3-2
EN61000-3-3
ETS300386-1/ES201468
CISPR24
EN 301-489-1
EN 301-489-17
Table 1 Regulatory Standards Compliance for the Cisco Catalyst Blade Switch 3000 Series
for Dell
Specification Description
Table 2 Industry EMC, Safety, and Environmental Standards
Specification Description
NEBS GR-63-Core NEBS Level 3
GR-1089-Core NEBS Level 3
ETSI ETS 300 019-1-1, Class 1.2 Storage
ETS 300 019-1-2, Class 2.3 Transportation
ETS 300 019-1-3, Class 3.2 Stationary Use

Cisco 3000 Series Specifications

General

Model	Cisco 3000 Series
Ports	Varies by model
Switching Capacity	Up to 176 Gbps
Power Supply	Internal or external, varies by model
Layer Support	Layer 2 and Layer 3
Power over Ethernet	PoE or PoE+
Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45°C (32° to 113°F)
Operating Humidity	10% to 85% non-condensing
Uplink Interfaces	Optional 1G/10G SFP/SFP+ or 10GBase-T