Cisco 3600 Series Configuration Note

Cisco 3600 Series Memory Upgrade Configuration Note 15
Upgrading Flash Memory
Caution To avoid damaging ESD-sensitive components, observe all ESD precautions. To avoid
damaging the motherboard, avoid using excessive force when you remove or replace SIMMs.
Removing Flash-Memory SIMMs
Follow this procedure to remove an existing Flash-memory SIMM:
Step 1 Put on an ESD-preventive wrist strap and ensure that it makes good contact with your
skin. Connect the equipment end of the wrist strap to the metal backplate of the chassis,
avoiding contact with connectors.
Step 2 Find the Flash-memory SIMM sockets on the router motherboard. (See Figure 10 and
Figure 11.)
Figure 10 Cisco 3620 Flash Memory Locations
H7318
Flash memory SIMMs

Cisco 3600 Series Specifications

General

Operating System	Cisco IOS
Series	3600
Type	Modular Router
Interfaces	Ethernet, Fast Ethernet, Serial, ISDN
Routing Protocols	RIP, OSPF, EIGRP, BGP, IS-IS
Redundancy	Optional redundant power supply
Management	CLI, SNMP, Telnet
Weight	Varies depending on the specific model
Power Supply	AC or DC, optional redundant power supply