Series Specifications
Cisco IOS Requirements
Cisco 7300 Series
41
Processor RM 7000 MIPS and Parallel Express Forwarding (PXF)
Flash Memory 32 MB (expandable to 128 MB)
System DRAM Memory 128 MB (expandable to 512 MB)
Modular Slots 4
Fixed Ports 2
Internal Power Supply AC or DC (both redundant)
Dimensions 7 x 17.2 x 20.5 in.
Performance Up to 3.5 Mpps
Console Port 1
Auxiliary Port 1
Base Configuration 4-slot chassis, NSE-100, 1 AC power supply, IP software, 2 GE ports
Maximum Ethernet Ports 2 fixed GE ports
Voice/Data Support Yes
Integrated Modems No
Integrated CSU/DSU Yes (T3)
Compression S/W
Encryption S/W + H/W
Redundant Power Supply Support Yes
Minimum Cisco IOS Release Cisco IOS 12.1.9-EX or later
Memory Requirements
Generally, 32 MB of Flash and 128 MB of DRAM is recommended; however, Flash and DRAM requirements typically
vary by IOS release.
Feature Set Software Image
Enterprise/SNASW Plus c7300-a3js-mz
Enterprise c7300-js-mz
Enterprise/FW/IDS IPSec 3DES c7300-jk9o3s-mz
Enterprise/FW/IDS IPSec 56 c7300-jk8o3s-mz
IP Plus c7300-is-mz
IP/FW/IDS IPSec 3DES c7300-ik9o3s-mz
IP/FW/IDS IPSec 56 c7300-ik8o3s-mz