36 4021196 Rev A
Configure Wireless Settings
Wireless Configuration Wi-Fi Protected Setup Example
Wireless Configuration Wi-Fi Protected Setup Page Description
Use the descriptions and instructions in the following table to configure the basic
settings for Wi-Fi Protected Setup for the residential gateway. After you make your
selections, click Save Settings to apply your changes or
Cancel Changes to cancel.
Section Field Description
Basic Settings
Enable or Disable the wireless network
Wi-Fi Protected Setup Configuration
The Wi-Fi Protected Setup feature automatically configures an
encryption-secured, wireless network. To use Wi-Fi Protected Setup,
you must have at least one other device that supports Wi-Fi Protected
Setup in your network. After you have configured your Wi-Fi
Protected Setup devices, you can manually configure other devices.
WPS Push Button Setup (Option 1)
Press the Wi-Fi Protected Setup button on the Basic Wireless Settings
page or the button on the back panel of the gateway to register a
wireless client with the gateway. Press the Wi-Fi Protected Setup
software button on the client side at the same time as the Wi-Fi
Protected Setup button is pushed on the gateway. The connection
will be automatically set up.
To Next Page
Loading...
Need help?
General