Cisco Systems, Inc.
www.cisco.com
Cisco Dual LTE-Single GPS Multi-band Antenna
Installation Guide
This document provides the description, supported features, and installation instructions of the Cisco
Dual LTE-Single GPS Multi-band (4G-LTE-ANTM-O-3) Antennas.
Caution Read the information in Safety Precautions before installing or replacing antennas.
This document contains the following sections:
• Overview of the 4G-LTE-ANTM-O-3 Antenna, page 1
• Supported Antennas, page 12
• Supported Antenna Accessories, page 12
• Antenna Options by Deployment Type, page 13
• Safety Precautions, page 13
• Installation Instructions, page 15
• Deployment Scenarios, page 17
• Antenna Ports, page 19
• Related Documentation, page 20
• Obtaining Documentation and Submitting a Service Request, page 20
Overview of the 4G-LTE-ANTM-O-3 Antenna
Deciding which antenna to use involves multiple factors, such as coverage area, maximum distance,
indoor location, outdoor location, and antenna height.
When an antenna is used indoors, the building construction, ceiling height, and internal obstructions
must be considered. In outdoor environments, obstructions such as trees, vehicles, buildings, and hills
must be considered. Distance is the primary factor when using outdoor-wireless communications.
However, coverage area also becomes important when you use wireless client devices to communicate
with a wireless device.
To Next Page
Need help?
General
