Cisco AIR-ANT2544V4M-R - User Manual

Americas Headquarters:
© 2012 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Aironet Dual-Band MIMO Wall-Mounted
Omnidirectional Antenna (AIR-ANT2544V4M-R)
This document outlines the specifications for the Cisco Aironet 2.4-GHz/5-GHz Dual-Band MIMO
Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) and provides instructions for
mounting it. The antenna operates in the 2.4- and 5-GHz frequency ranges and is designed for indoor or
outdoor use.
The following information is provided in this document.
• Technical Specifications, page 2
• System Requirements, page 4
• Safety Precautions, page 5
• Installation Notes, page 6
• Installing the Antenna, page 7
• Suggested Cable, page 13
• Obtaining Documentation and Submitting a Service Request, page 13

Cisco AIR-ANT2544V4M-R Specifications

General

Gain	4 dBi
Polarization	Vertical
Connector Type	RP-TNC
Impedance	50 Ohms
Antenna Type	Omnidirectional
Operating Temperature	-40°C to +70°C

Summary

Technical Specifications

System Requirements

Safety Precautions

Installation Notes

Choosing a Mounting Location

Guidance on selecting optimal antenna placement based on environmental factors.

Installing the Antenna

Tools and Equipment Required

Lists hardware included and tools that may be needed for mounting.

Mounting on a Vertical Surface

Step-by-step instructions for mounting the antenna on a vertical surface.

Azimuth and Elevation Adjustment

Details on adjusting the antenna's orientation after mounting.

Mounting on a Ceiling

Step-by-step guide for mounting the antenna on a ceiling.

Mounting on a Mast

Instructions for mounting the antenna onto a mast.

Suggested Cable

Obtaining Documentation and Submitting a Service Request