Cisco AIR-ANT2513P4M-N - User Manual

Cisco Systems, Inc.
www.cisco.com
Cisco Aironet Four-Port Dual-Band
Polarization-Diverse Antenna
(AIR-ANT2513P4M-N)
First Published: July 2014
Last Updated: December 12, 2014
This document describes the AIR-ANT2513P4M-N antenna and provides electrical specifications and
mounting instructions. The antenna is a four-port polarization-diverse patch array that operates over the
2.4-GHz and 5-GHz Wi-Fi bands. It ships with an articulating mount for use on flat surfaces and masts
and is adjustable in both the horizontal and vertical planes. The radome is paintable using commonly
available non-conductive spray paints, such as Krylon or Rust-Oleum. The antenna is designed for use
in indoor and outdoor environments with Cisco Aironet 3702P and 1570 series access points.
The following information is provided in this document:
• Technical Specifications, page 2,
• System Requirements, page 7
• Safety Instructions, page 7
• Installation Notes, page 7
• Choosing a Mounting Location, page 8
• Installing the Antenna, page 8
• Painting the Antenna, page 14
• Obtaining Documentation and Submitting a Service Request, page 14

Summary

Technical Specifications

System Requirements

Safety Instructions

Installation Notes

Choosing a Mounting Location

Installing the Antenna

Contents of Antenna Bracket Kit

Details the components included in the antenna bracket kit for installation purposes.

Tools and Equipment Required

Lists the necessary tools and equipment for mounting the antenna on a wall, ceiling, or pole.

Mounting on a Wall or Ceiling

Provides step-by-step instructions for securely mounting the antenna onto a wall or ceiling surface.

Mounting on a Pole or Mast

Guides users through the process of mounting the antenna onto a pole or mast using hose clamps.

Suggested Cable

Recommends specific high-quality, low-loss cables for connecting the antenna to access points.

Painting the Antenna

Obtaining Documentation and Submitting a Service Request

Cisco AIR-ANT2513P4M-N Specifications