58
Regulatory Compliance and Safety Information for Cisco 7200 Series Routers
78-3419-19
EMC Environmental Conditions for Products Installed in the European Union
EMC Environmental Conditions for Products Installed in the
European Union
This section applies to products to be installed in the European Union.
The equipment is intended to operate under the following environmental conditions with respect to
EMC:
• A separate defined location under user’s control.
• Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
• AC power distribution shall be one of the following types, where applicable: TN-S and TN-C as
defined in IEC 364-3.
In addition, if equipment is operated in a domestic environment, interference may occur.
EMC Class A Statements/Warnings
This section includes the EMC Class A warnings for the Cisco 7201, 7202, Cisco 7204, Cisco 7206,
Cisco 7204VXR, and Cisco 7206VXR. The following Class A warnings are included:
• FCC Class A, page 59
• Canada – Class A, page 59
• Statement 191—VCCI Class A Warning for Japan, page 59
• Statement 256—Class A Warning for Hungary, page 60
Table 2 Industry EMC, Safety, and Environmental Standards
Specification Description
NEBS
1
1. NEBS = Network Equipment Building Systems
GR-1089-CORE: EMC and Safety (NEBS Level 3)
GR-63-CORE: Physical Protection (NEBS Level 3)
SR-3580: NEBS Criteria Levels (Level 3)
ETSI
2
2. ETSI = European Telecommunications Standards Institute
ETS 300 019 Storage Class 1.1
ETS 300 019 Transportation Class 2.3
ETS 300 019 Stationary Use Class 3.1
ETS EN 300 386
Table 3 Cisco 7201 Industry, EMC, and Environmental Standards
Specification Description
NEBS Designed to meet GR-63-CORE NEBS Level 3
Designed to meet GR-1089-CORE NEBS Level 3
ETSI Designed to meet ETS 300 019-1-1, Class 1.2 Storage
Designed to meet ETS 300 019-1-2, Class 2.3 Transportation
Designed to meet ETS 300 019-1-3, Class 3.2 Stationary Use
To Next Page
Loading...
Need help?
General
