Cisco 7200 Series Regulatory Compliance And Safety Information

63
Regulatory Compliance and Safety Information for Cisco 7200 Series Routers
78-3419-19
Telecom Approvals Listing
This equipment cannot be used on telephone company-provided coin services. Connection to the Party
Line Service is subject to state tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify you as soon as possible. You will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
might affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make the necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, please contact Cisco for repair and warranty information.
If the problem is causing harm to the telephone network, the telephone company might request that you
remove the equipment from the network until the problem is resolved. All repairs should be handled by
authorized Cisco Systems service personnel.
We recommend that you install an AC surge arrestor in the AC outlet to which this device is connected.
This action will help to avoid damage to the equipment caused by local lightning strikes and other
electrical surges.
This equipment uses the Uniform Service Order Code (USOC) jacks described in Table 4.
.
Table 4 USOC Jacks
Model Name Facility Interface Code
Service Order
Code Jack Type
PA-2CT1/PRI 04DU9-BN/DN/1KN/1SN/1ZN 6.0N Use registered CSU
PA-4B-U 02IS5 6.0N RJ-49C/CA-A11
PA-8B-S/T 02IS5 6.0N RJ-48C/CB-1D
PA-A3-8T1IMA 04DU9-BN/DN/1KN/1SN/1ZN 6.0N/F RJ-48C
PA-MC-2T1 04DU9-BN/DN/1KN/1SN/1ZN 6.0N/F RJ-48C
PA-MC-4T1 04DU9-BN/DN/1KN/1SN/1ZN 6.0N/F RJ-48C
PA-MC-8DSX1 04DU9-BN/DN/1KN/1SN/1ZN 6.0N/F RJ-48C
PA-MC-8TE1+ 04DU9-1SN 6. 0N RJ-48C
PA-MC-8T1 04DU9-BN/DN/1KN/1SN/1ZN 6.0N/F RJ-48C
PA-MCX-2TE1 04DU9-1SN 6.0Y RJ-48C
PA-MCX-4TE1 04DU9-1SN 6.0Y RJ-48C
PA-MCX-8TE1 04DU9-1SN 6.0Y RJ-48C
PA-VXA-1TE1-24+ 04DU9-BN/1KN/1SN 6.0Y RJ-48C
PA-VXA-1TE1-30+ 04DU9-BN/1KN/1SN 6.0Y RJ-48C
PA-VXB-2TE1 04DU9-BN/1KN/1SN 6.0Y RJ-48C
PA-VXB-2TE1+ 04DU9-BN/1KN/1SN 6.0Y RJ-48C
PA-VXC-2TE1 04DU9-BN/1KN/1SN 6.0Y RJ-48C
PA-VXC-2TE1+ 04DU9-BN/1KN/1SN 6.0Y RJ-48C

Cisco 7200 Series Specifications

General

Chassis	Modular
Product Type	Network Router
Form Factor	Rack-mountable
Software	Cisco IOS
Performance	Up to 2 Mpps
Processor	MIPS RISC
Memory	Up to 64 MB Flash
Interfaces	Ethernet, Fast Ethernet, Gigabit Ethernet, ATM, Serial
Power Supply	AC or DC power supply options
Slots	Up to 6 slots
Dimensions	Varies by model
Weight	Varies by model
Model	7200 Series