1-13
Cisco 7200 VXR Installation and Configuration Guide
78-5469-03
Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
A fully configured Cisco 7206VXR, with two installed power supplies and all
chassis slots filled, weighs approximately 50 pounds (22.7 kilograms [kg]). For
clearance requirements and rack-mount installation considerations, see
Chapter 2, “Preparing for Installation,” the “Site Requirement Guidelines”
section on page 2-4.
Field-Replaceable Units
The Cisco 7200 VXR routers are easy to service; many of their major components
are field-replaceable units (FRUs). The following sections describe Cisco 7200
VXR router FRUs:
• Network Processing Engine or Network Services Engine, page 1-14
• Input/Output Controller, page 1-33
• LED Descriptions, page 1-42
• Port Adapters and Service Adapters, page 1-50
• Power Supplies, page 1-52
• Chassis, page 1-55
• Flash Disks and Flash Memory Cards, page 1-56
• Rack-Mount and Cable-Management Kit, page 1-57
Note Replacement instructions for removing and replacing FRUs are
contained in separate documents that accompany each FRU shipped
from the factory. For example, if you need to replace an AC power
supply in your Cisco 7200 VXR router, refer to the 280-Watt
AC-Input Power Supply Replacement Instructions publication.
Replacement instructions are also available on the Documentation
CD-ROM and on Cisco Connection Online (CCO).
To Next Page
Loading...
