Cisco 7200 VXR - Page 35

1-35
Cisco 7200 VXR Installation and Configuration Guide
78-5469-03
Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
• Two PC Card slots that hold Flash Disks or Flash memory cards for storing
the default Cisco IOS software image
• Flash memory for storing the boot helper image
• Boot ROM for storing sufficient code for booting the Cisco IOS software
• Two environmental sensors for monitoring the cooling air as it enters and
leaves the chassis
Figure 1-13 C7200-I/O-GE+E—with GBIC Gigabit Ethernet and RJ-45 Ethernet Receptacles
33445
LINK
C7200-I/O-GE+E
CLASS 1 LED PRODUCT
PRODUKT MIT KLASSE 1 LED
PRODUIT AVEC VOYANT DEL
DE CLASSE 1
PRODUCTO LED DE CLASE 1
ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER
CONSOLE
AUX
PORT
E 0
LINK
SLOT 0
PORT
GE O
RX
TX
EJECT
PCMCIA
SLOT 1
ENABLED
CPU
RESET
IO PWR
OK
PC Card slots
GBIC receptacle
Console
port
Captive
installation
screw
Auxiliary
port
RJ-45
receptacle
Midplane
connectors
Battery for
SRAM
Temperature
sensor
SRAM
[U19]
8-MB Flash memory
(soldered) [U13], [U25]
Temperature
sensor