Index
IN-15
Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0
R
rack
recommendations, Cisco 7505
2-16
recommendations, Cisco 7507 and Cisco
7507-MX
2-18
recommendations, Cisco 7513, Cisco 7513-MX, and
Cisco 7576
2-20
ventilation 2-15
rack-mounting procedure, Cisco 7505 3-7 to ??
radio frequency interference
See RFI
recovering a lost password
4-9
refresh, environmental display 2-28
reload command 4-7
replaceable system components 5-1, 6-1, 7-1
reports, environmental 2-26
reset switch 8-22
RFI, preventing effects of 2-11
RIP
See Routing Information Protocol
Routing Information Protocol, configuring
4-14
RSP
console and auxiliary port connections
3-32
Flash memory card replacement 4-20
LEDs 8-6, 8-10, 8-14, 8-18
normal startup 8-6, 8-10, 8-14
operating voltages 8-5, 8-13
troubleshooting 8-18
RSP2
description
1-31 to 1-33
DRAM
location
9-1
upgrade procedure 9-1 to 9-5
system CPU 1-32
Y-cables 1-45
RSP4
3.3V DIMM device caution
9-6, 9-7
description 1-33 to 1-36
DRAM
location
9-6
system CPU 1-35
Y-cables 1-45
RSP4 and RSP8
3.3V DIMM device caution
9-8
DRAM
DIMM configurations
9-8
upgrade procedure 9-5 to 9-11
RSP8
description
1-36 to 1-38
DRAM DIMM location 9-7
Y-cables 1-45
S
safety
agency approvals
Cisco 7505
1-6
Cisco 7507 1-10
Cisco 7507-MX 1-14
Cisco 7513 1-19
Cisco 7513-MX 1-24
Cisco 7576 1-30
cable recommendations 2-2
ESD 2-6
general guidelines 2-2
lifting the chassis 2-3, 2-5
recommendations 2-2, 2-3
Safety Warnings xv
sample configuration 4-13 to 4-15, 4-16 to 4-17
saving the configuration file 4-17, 4-19
secret passwords, enabling 4-8
sensors, temperature 2-28, 2-30, 2-33, 2-36
setup command facility
example
4-14
script
banner information (example)
4-12
interface summary (example) 4-13
To Next Page
Loading...
