2-5
Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0
Chapter 2 Preparing for Installation
Safety Recommendations
When you get ready to place the Cisco 7513, Cisco 7513-MX, or Cisco 7576 into a rack or onto a
tabletop, each person should lift it by grasping the side handle with one hand and the bottom of the
chassis with the other, and lift the chassis with your legs, as shown in Figure 2-2. (Do not lift the chassis
using the blower module handle or the air intake vent below the card cage.)
Figure 2-2 Correct Way to Lift the Cisco 7513, Cisco 7513-MX, or Cisco 7576
Caution To prevent damage to the air intake vent below the card cage, do not lift the Cisco 7513, Cisco 7513-MX,
or Cisco 7576 by grasping the side handle with one hand and the bottom of the card cage with the other,
as shown in Figure 2-3. The air intake vent is not designed to support the weight of the chassis. Lift the
chassis as shown in Figure 2-2.
POWER
A
POWER
B
H3118
To Next Page
Loading...
