Cisco 7500 Series - Page 9

Contents
ix
Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0
Cisco 7507 and Cisco 7507-MX Power Supply LEDs 8-23
Cisco 7513, Cisco 7513-MX, and Cisco 7576 Power Supply LEDs 8-25
Additional Reference Information for Troubleshooting 8-26
CHAPTER 9 Replacing DRAM on the Route Switch Processor 9-1
Upgrading or Replacing DRAM SIMMs on the RSP2 9-1
Removing RSP2 SIMMs 9-3
Installing New RSP2 SIMMs 9-4
Upgrading or Replacing DRAM DIMMs on the RSP4 and RSP8 9-5
Removing RSP4 and RSP8 DIMMs 9-9
Installing New RSP4 or RSP8 DIMMs 9-10
APPENDIX A Configuration Register Information A-1
Configuration Bit Meanings A-1
Bits 0–3 A-2
Bit 6 A-3
Bit 7 A-3
Bit 8 A-4
Bit 10 and Bit 14 A-4
Bit 11 and Bit 12 A-4
Bit 13 A-4
Bit 15 A-5
Displaying the Configuration Register While Running Cisco IOS A-5
Displaying the Configuration Register While Running ROM Monitor A-5
Setting the Configuration Register While Running Cisco IOS A-6
Setting the Configuration Register While Running ROM Monitor A-6
I NDEX