Cisco 7937G User Manual

Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 7
Registering with TAPS
After the conference station is connected to the network, your system administrator might ask you to
auto-register the conference station using TAPS (Tool for Auto-Registered Phones Support). TAPS
might be used either for a new conference station or to replace an existing conference station. To
register with TAPS, activate the conference station, enter the TAPS extension provided by your system
administrator, and follow the voice prompts. You might need to enter your entire extension, including
the area code. After the conference station displays a confirmation message, hang up. The
conference
station will re-start.

Cisco 7937G Specifications

General

Brand	Cisco
Model	7937G
Category	Conference System
Language	English