Cisco 851 - Cisco Network Modules; Cisco 2600 Series


118 
Cisco 2600 Series
Modular Access Routers
Cisco Network Modules



16-port 10/100
EtherSwitch Network
Module
Provides 16 switch ports
and one internal port to
the router engine Features
include 8021p prioritization
and 80211q VLAN, and
8021d Spanning-Tree
Protocol

LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules

16-port 10/100
EtherSwitch Network
Module with 1 GbE
(1000BASE-T) Port
Provides 16 switch ports,
one GbE port and one
internal port to the router
engine Features include
8021p prioritization and
80211q VLAN, and 8021d
Spanning-Tree Protocol

LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules

16-port 10/100
EtherSwitch Network
Module with Inline Power
Support
Provides 16 switch
ports with inline power
support and one internal
port to the router engine
Features include 8021p
prioritization and 80211q
VLAN, and 8021d
Spanning-Tree Protocol

LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
This is a bundle of one
NM-16-ESW and one
PPWR-DCARD-16ESW
Requires an internal PoE
power supply











*If platform is not listed in the supported platforms column in the following pages, then that platform is not supported