EasyManuals Logo

Cisco 871 Datasheet

Cisco 871
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 13
Feature Description
DSL and ATM Features
(DSL Models Only)
ATM Variable Bit Rate/real-time (VBR-rt)
ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate/non-real-time (VBR-nrt)
ATM Operation, Administration, and Maintenance (OAM) Support for F5 Continuity Check; segment and end-to-end
loopback; and Interim Local Management Interface (ILMI) support
10 virtual circuits
Security Features
Stateful Inspection Firewall
Bridging firewall (Cisco 871 only)
NAT transparency
Firewall support for skinny clients
Hardware-accelerated 3DES for IPSec
Hardware-accelerated AES for IPSec
Cisco Easy VPN Client and Server
IPSec 3DES termination/initiation
IPSec passthrough
Point-to-Point Tunneling Protocol (PPTP) passthrough
L2TP passthrough
802.1x
Secure HTTP (HTTPS), FTP, and Telnet authentication proxies
10 VPN Tunnels
Advanced Application Inspection and Control
E-mail Inspection Engine
No Service Password Recovery
HTTP Inspection Engine
System Logging–EAL4 Certification Enhancements
Easy VPN Remote Web Based Activation
QoS Features
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Low-Latency Queuing (LLQ)
Class-Based Traffic Shaping (CBTS) (Cisco 871 only)
Class-Based Traffic Policing (CBTP) (Cisco 876, 877, and 878 only)
Class-Based QoS MIB
Prefragment before encryption
TX ring adjustment
VC bundling
Policy-based routing (PBR)
Per-VC queuing
Per-VC traffic shaping
Management Features
Cisco SDM
Management of LAN switch ports
Cisco Configuration Express
Cisco Configuration Engine support
DSL firmware update from Flash
Cisco Service Assurance Agent (SAA)
Telnet, Simple Network Management Protocol (SNMPv3), CLI, and HTTP management
RADIUS and TACACS+
High-Availability Features
Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
Hot Standby Router Protocol (HSRP)
Out-of-band management with external modem through virtual auxiliary port
Dial backup with external modem through virtual auxiliary port
ISDN S/T port for out-of-band management (Cisco 876 and 878 only)
VLAN Support for 2 VLANs with Base Image. One VLAN dedicated to DMZ.

Other manuals for Cisco 871

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 871 and is the answer not in the manual?

Cisco 871 Specifications

General IconGeneral
Flash memory24 MB
Internal memory128 MB
Operating altitude0 - 3000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
USB ports quantity2
Ethernet LAN (RJ-45) ports4
Security algorithms3DES, AES, DES, EAP-FAST, EAP-MD5, EAP-SIM, EAP-TLS, EAP-TTLS, HTTPS, LEAP, PEAP, TKIP, WEP, WPA, WPA2
Product colorBlack
Rack mountingNo
Weight and Dimensions IconWeight and Dimensions
Depth215.9 mm
Width260.4 mm
Height50.8 mm
Weight954 g

Related product manuals