Cisco 9000 Series User Manual

Figure 4: Installing the Switch onto the 2-Post Rack From the Front Side of the Chassis
Figure 5: Installing the Switch onto the 2-Post Rack From the Rear Side of the Chassis
c. Tighten the 10-32 screws to 20 in-lb (2.26 N.m) or tighten the 12-24 screws to 30 in-lb (3.39 N.m).
Installing the Cisco MDS 9148V-K9 Switch
11
Installing the Cisco MDS 9148V-K9 Switch
Installing the Switch into a 2-Post Rack

Cisco 9000 Series Specifications

General

Model	Cisco 9000 Series
Latency	Sub-microsecond
Ports	1/10/25/40/100 GE
Power Supply	Redundant
Layer	Layer 2 and Layer 3
Security Features	ACLs, TrustSec, MACsec
Modularity	Modular and fixed configurations available
Management	Cisco DNA Center, CLI, SNMP
Redundancy	Power supplies