To Next PageTo Next Page
Need help?Do you have a question about the Cisco MDS 9132T and is the answer not in the manual?
General| Airflow | Front-to-back |
|---|---|
| Product Type | Fibre Channel Switch |
| Rack-mountable | Yes |
| Manageable | Yes |
| Product Model | MDS 9132T |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Power Supply | AC |
| Data Transfer Rate | 32 Gbps |
| Fibre Channel Standard | FC-FS-2, FC-GS-4, FC-SW-2 |
| Humidity | 5% to 93% (non-condensing) |
| Ports | 32 x 32Gbps Fibre Channel |
| Form Factor | 1U |
| Dimensions | 1.72 x 17.3 x 19.2 in |
| Port Speed | 32 Gbps |
| Weight | 17.6 lbs (8 kg) |
Details front and rear views of the switch, including ports, LEDs, and components.
Explains the types of fan modules, their airflow direction, and installation requirements.
Describes power supply units, their types, airflow, and redundancy features.
Details the Linecard Expansion Module (LEM), its ports, and installation.
Explains the meaning and status of various LEDs on the switch.
Lists the types of SFP+ transceivers supported by the switch.
Outlines general requirements for cabinets and racks, including dimensions and load ratings.
Details specific perforation and airflow requirements for perforated cabinets.
Details requirements for solid-walled cabinets, including airflow and depth.
Covers essential preparation steps before installing the switch, including safety.
Describes different rack mounting methods like EIA and Telco racks.
Step-by-step guide for installing the switch in a 4-post rack.
Step-by-step guide for installing the switch in a 2-post rack.
Guides on installing/removing LEM, PSUs, and fan modules.
Instructions for properly grounding the switch chassis for safety.
Considers cabling, distance, and equipment for network interfaces.
Details connecting the console port to a PC or modem.
Instructions for connecting to the MGMT Ethernet ports.
Guidance on connecting to Fibre Channel ports using SFP transceivers.
Steps for powering up the switch and verifying component installation.
Lists environmental and physical specifications for the switch.
Details power dissipation calculations and requirements.
Provides specifications for various SFP+ transceiver types.
Lists the cables and adapters included in the switch accessory kit.
Describes connections for the management Ethernet ports.
Provides detailed pinout information for the console port.
Lists supported power cords and plugs for different regions.
A checklist for essential site planning tasks before installation.
Worksheet to record essential contact and site details.
Worksheet to record chassis serial number and network configuration.
