Cisco MDS 9132T User Manual

CHAPTER 1
Preface
This preface describes the audience, organization, and conventions of Cisco MDS 9000 Series Configuration
Guides. It also provides information on how to obtain related documentation.
•
Preface, page 1
•
Audience, page 1
•
Document Conventions, page 1
•
Related Documentation, page 2
•
Obtaining Documentation and Submitting a Service Request, page 2
Preface
This preface describes the audience, organization, and conventions of Cisco MDS 9000 Series Configuration
Guides. It also provides information on how to obtain related documentation.
Audience
To use this installation guide, you need to be familiar with electronic circuitry and wiring practices and
preferably be an electronic or electromechanical technician.
Document Conventions
This document uses the following conventions:
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
manual.
Note
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
1

Cisco MDS 9132T Specifications

General

Airflow	Front-to-back
Product Type	Fibre Channel Switch
Rack-mountable	Yes
Manageable	Yes
Product Model	MDS 9132T
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Power Supply	AC
Data Transfer Rate	32 Gbps
Fibre Channel Standard	FC-FS-2, FC-GS-4, FC-SW-2
Humidity	5% to 93% (non-condensing)
Ports	32 x 32Gbps Fibre Channel
Form Factor	1U
Dimensions	1.72 x 17.3 x 19.2 in
Port Speed	32 Gbps
Weight	17.6 lbs (8 kg)