Cisco MDS 9132T

Table 16: Port Mode Signaling and Pinouts with DB-25 Adapter
Console DeviceRJ-45 to DB-25
Terminal Adapter
RJ-45 to RJ-45 Rollover CableConsole Port
SignalDB-25 PinRJ-45 PinRJ-45 PinSignal
CTS581RTS
DSR672DTR
RxD363TxD
GND754GND
GND745GND
TxD236RxD
DTR2027DSR
RTS418CTS
Connecting the Console Port to a Computer Using the DB-9 Adapter
You can use the RJ-45 to RJ-45 rollover cable and RJ-45 to DB-9 female DTE adapter (labeled “Terminal”)
to connect the console port to a computer running terminal emulation software. The following table lists the
pinouts for the console port, the RJ-45 to RJ-45 rollover cable, and the RJ-45 to DB-9 female DTE adapter.
Table 17: Port Mode Signaling and Pinouts with DB-9 Adapter
Console DeviceRJ-45 to DB-9
Terminal Adapter
RJ-45 to RJ-45 Rollover CableConsole Port
SignalDB-9 PinRJ-45 PinRJ-45 PinSignal
CTS881RTS
DSR672DTR
RxD263TxD
GND554GND
GND545GND
TxD336RxD
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
67
Cable and Port Specifications
Connecting the Console Port to a Computer Using the DB-9 Adapter