Cisco MDS 9132T

Power Requirements and Environmental Conditions for 32 Gbps SFPs
The following table provides the optical parameters for 32 Gbps SFPs.
Table 6: Optical Parameters for 32 Gbps SFPs
Fiber Loss Budget (dB)Average
Receive Power
(dBm)
Average Transmit
Power (dBm)
SFP+
OM5OM4OM3OM2MaxMinMaxMin
2.04 (8
Gbps)
1.95 (16
Gbps)
1.86 (32
Gbps)
2.04 (8 Gbps)
1.95 (16 Gbps)
1.86 (32 Gbps)
2.04 (8
Gbps)
1.86 (16
Gbps)
1.86 (32
Gbps)
1.68 (8 Gbps)
1.63 (16
Gbps)
2.02 (32
Gbps)
2.0-8.22.0-6.2DS-SFP-FC32G-SW
6.4 (8 Gbps)
6.4 (16 Gbps)
6.4 (32 Gbps)
2.0-11.42.0-5.0DS-SFP-FC32G-LW
The following table provides information on operating and storage temperature ranges.
Table 7: Operating and Storage Temperature Ranges for 32 Gbps SFPs
StorageOperatingSFP+
MaxMinMaxMin
70°C-40°C40°C0°CDS-SFP-FC32G-SW
70°C-40°C40°C0°CDS-SFP-FC32G-LW
General Specifications for Cisco Fibre Channel 16 Gbps SFP+ Transceivers
The following table summarizes cabling specifications for 16 Gbps.
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
58
Technical Specifications
Cisco Fibre Channel SFP+ Transceivers