Cisco MDS 9148

Send documentation comments to mdsfeedback-doc@cisco.com
Cisco MDS 9148 Multilayer Fabric Switch Quick Start Guide
Date: February 2010
Text Part Number: OL-21517-01
1 Overview
2 Verifying Your Shipping Contents
3 Installing the Switch
4 Installing the SFPs
5 Powering Up the Switch
6 Setting Up a Network
7 Connecting Devices
8 Installing Cisco Device Manager
9 Using the Quick Config Wizard
10 Creating VSANs
11 Need Help?

Cisco MDS 9148 Specifications

General

Form Factor	1RU
Switching Capacity	768 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-40 to 158°F (-40 to 70°C)
Port Speed	4/8/16 Gbps
Throughput	384 Gbps
Latency	Less than 2 microseconds
Power Supply	Dual hot-swappable
Management	CLI
Fibre Channel Zoning	Hardware enforced zoning
Relative Humidity	5 to 95% non-condensing
Dimensions	1.72 x 17.3 x 19.5 inches

Summary

Installing the Switch

Installing the SFPs

Powering Up the Switch

Setting Up a Network

Connecting Devices

Installing Cisco Device Manager

Using the Quick Config Wizard

Creating VSANS