Cisco MDS 9148 User Manual

10
Send documentation comments to mdsfeedback-doc@cisco.com
Figure 12 Confirm Changes
Step 8 Click Finish to save your changes.
Step 9 Repeat Steps 2 through 5 to create more zones.
Note A maximum of 12 zones with two ports each can be created with the Quick Config Wizard.
Note For more information about installing Cisco Device Manager and using the Quick Config Wizard, see the Cisco MDS
9000 Family Fabric Manager Configuration Guide.
10 Creating VSANs
To create VSANs, follow these steps:
Step 1 Click the Device Manager icon on your desktop to log in.
Step 2 Enter a password in the Password field (see Figure 13).
Step 3 Click the Open button (see Figure 13).

Cisco MDS 9148 Specifications

General

Form Factor	1RU
Switching Capacity	768 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-40 to 158°F (-40 to 70°C)
Port Speed	4/8/16 Gbps
Throughput	384 Gbps
Latency	Less than 2 microseconds
Power Supply	Dual hot-swappable
Management	CLI
Fibre Channel Zoning	Hardware enforced zoning
Relative Humidity	5 to 95% non-condensing
Dimensions	1.72 x 17.3 x 19.5 inches