Name: Cisco MDS 9148
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Send documentation comments to mdsfeedback-doc@cisco.com

9 Using the Quick Config Wizard

To enable ports and assign zone memberships, follow these steps:

Step 1 Click the Device Manager icon on your desktop to log in.

Step 2 Enter a password in the Password field (see Figure 10).

Step 3 Click Open (see Figure 10).

Figure 10 Device Manager Login

Step 4 Click FC, and then choose Quick Config.

Step 5 Enable two ports by checking the two corresponding check boxes in the Enable column, as shown in Figure 11.

Figure 11 Enable Zone Ports

Step 6 Select one of the two enabled ports that you want in a zone by checking its check box in the Ports Zoned To area.

When you check this check box, the second enabled port automatically becomes checked. Both ports are now members

of the same zone.

Step 7 Click Next.

You see a summary of your changes, as shown in Figure 12.

Questions and Answers:

Need help?

Do you have a question about the Cisco MDS 9148 and is the answer not in the manual?

Cisco MDS 9148 Specifications

General