Need help?Do you have a question about the Cisco Meraki MS220 Series and is the answer not in the manual?
General| Model | MS220-8, MS220-8P, MS220-24, MS220-24P, MS220-48, MS220-48LP, MS220-48FP |
|---|---|
| PoE Budget | 124W (MS220-8P), 370W (MS220-24P), 370W (MS220-48LP), 740W (MS220-48FP) |
| Layer | Layer 2 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 5% to 95% non-condensing |
| Certifications | UL, CE, FCC, RoHS |
| DRAM | 512 MB |
| Flash Memory | 128 MB |
| Layer 3 Features | Static routing |
| Ports | 8, 24, 48 Gigabit Ethernet ports |
| Uplink Ports | 2 or 4 SFP/SFP+ ports (depending on model) |
| Switching Capacity | 20 Gbps (MS220-8), 56 Gbps (MS220-24), 104 Gbps (MS220-48) |
| Forwarding Rate | 14.88 Mpps (MS220-8), 41.67 Mpps (MS220-24), 77.38 Mpps (MS220-48) |
| Power over Ethernet (PoE) | Available on select models (MS220-8P, MS220-24P, MS220-48LP, MS220-48FP) |
| Management | Managed via Meraki Dashboard |
| Stacking | Virtual Stacking supported |
| Power Supply | Internal power supply |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| MAC Address Table Size | 16, 000 entries |
| Security Features | 802.1X authentication |
| Quality of Service (QoS) | 8 queues per port |
| VLANs | Up to 4094 VLANs |
Procedures for mounting the switch in a server rack.
Steps for placing the switch on a desk or shelf.
Guidelines for installing the switch on a flat surface.
Explains the status and meaning of power and link/activity LEDs.
Step-by-step guide on connecting power and network cables to the switch.
Details the power requirements for different Meraki MS220 models.
Specifies the recommended operating temperature range for the device.
Important safety guidelines to prevent damage, shock, or injury.
To Next Page