Cisco Meraki MS120-8 Series

To Next Page

MS120-8 Series Installation Guide

About this Guide

This guide provides instruction on how to install and configure your MS120-8 series switch. This guide also provides mounting instructions and limited

troubleshooting procedures. For more switch installation guides, refer to the switch installation guides section on our documentation website.

Model Number Description

MS120-8 Layer-2 8-port gigabit Ethernet switch with 2 SFP interfaces

MS120-8LP

Layer-2 8-port gigabit Ethernet 67W PoE switch with 2 SFP

interfaces

MS120-8FP

Layer-2 8-port gigabit Ethernet 124W PoE switch with 2 SFP

interfaces

Product Overview

Physical Specifications

MS120-8 MS120-8LP MS120-8FP

1Gbe RJ45 8

1Gbe SFP 2 2 2

Dedicated Mgmt Interface - - -

PoE Capable - Yes, 67W Yes, 124W

Power Consumption

5 - 161W 5 - 161W 5 - 161W

Power Load (idle/ max) 5 / 9 W 7 / 88 W 9 / 161 W

Operating Temperature

32°F - 113 °F

0°C - 45°C

32°F - 113 °F

0°C - 45°C

32°F - 113 °F

0°C - 45°C

Storage and

Transportation Temperature

-4°F - 158°F -4°F - 158°F -4°F - 158°F

All manuals and user guides at all-guides.com

Main Page

Need help?

Do you have a question about the Cisco Meraki MS120-8 Series and is the answer not in the manual?

Cisco Meraki MS120-8 Series Specifications

General

Model	MS120-8
Uplink Ports	2 x 1G SFP
Switching Capacity	20 Gbps
Power over Ethernet (PoE)	No
Total Non-Blocking Throughput	10 Gbps
Forwarding Rate	14.88 Mpps
Stacking	No
Layer	Layer 2
Operating Temperature	32°F to 104°F (0°C to 40°C)
Power Consumption	10W (typical)
Management	Cloud-managed
Mounting	Desktop
L2 MAC Address Table	8000 entries
VLAN Support	Yes
QoS	Yes
Security Features	802.1X, DHCP snooping
Power Supply	External AC Adapter
Ports	8 x 1G