3
Send documentation comments to mdsfeedback-doc@cisco.com
2 Verifying Your Shipping Contents
Verify that you have received all items, including the following:
• Rack-mount kit
• ESD wrist strap
• Cables and connectors
• Any optional items ordered
3 Installing the Switch
Install the switch in one of the following enclosures:
• An open EIA rack
• A perforated or solid-walled EIA cabinet
• A two-post Telco rack
For an example of a rack mount, see Figure 3.
Figure 3 Example Rack Mount
181543
Note Before you install the switch in a rack, you will need to install the rack mount support brackets on the switch.
To Next Page
Loading...
