Cisco MDS 9132T

Cisco Fibre Channel SFP+ Transceivers
The following table lists the Fibre Channel SFP+ transceivers available through Cisco Systems for the Cisco
MDS 9132T switch.
Table 4: Cisco Fibre Channel SFP + Transceivers for the Cisco MDS 9132T Switch
TypeDescriptionPart Number
Short wavelength32 Gbps Fibre Channel SW SFP+DS-SFP-FC32G-SW
Long wavelength32 Gbps Fibre Channel LW SFP+DS-SFP-FC32G-LW
Short wavelength16 Gbps Fibre Channel SW, SFP+DS-SFP-FC16G-SW
Long wavelength16 Gbps Fibre Channel LW, SFP+DS-SFP-FC16G-LW
Extended long wavelength16 Gbps Fibre Channel ELW, SFP+DS-SFP-FC16G-ELW
Short wavelength8 Gbps Fibre Channel SW, SFP+DS-SFP-FC8G-SW
Long wavelength8 Gbps Fibre Channel LW, SFP+DS-SFP-FC8G-LW
Extended Reach8 Gbps Fibre Channel ER SFP+DS-SFP-FC8G-ER
Long Distance8-Gbps Fibre Channel CWDM SFP+DS-CWDM8Gxxxx
General Specifications for Cisco Fibre Channel 32 Gbps SFP+ Transceivers
The following table summarizes cabling specifications for 16 Gbps.
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
56
Technical Specifications
Cisco Fibre Channel SFP+ Transceivers