4038501 Rev C Installation 2-3
Site Requirements
Introduction
Before you install the amplifier, make sure the installation site meets the
requirements discussed in this section.
Qualified Personnel
Only appropriately qualified and skilled personnel should attempt to install, operate,
maintain, and service this equipment.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
service this equipment. Otherwise, personal injury or equipment damage may
occur.
Operating Temperature Requirements
The external operating temperature range is –40 to +55°C (–40 to +131°F). Before you
install, make sure the environment is within the range specified.
WARNING:
Avoid damage to the amplifier. Operating the amplifier above the maximum
operating temperature specified will result in damage to the product.
To Next Page
Loading...