Cisco A93280 - Page 30

4038501 Rev C Operation 3-7
Setting Up the Amplifier with a Computer, Continued
The following table lists the parameters that are configurable when the AGC module
is mounted.
Category
Adjustable Item
Notes
AGC Configuration
AGC Mode Setting
Standby, AA, FixGain, or
AGC
High Pilot Frequency
47 to 1002 MHz
High Pilot Level
85 to 120 dBV
Backup High Pilot Frequency
47 to 1002 MHz
Backup High Pilot Level
85 to 120 dBV
Low Pilot Frequency
47 to 1002 MHz
Low Pilot Level
85 to 120 dBV
Backup Low Pilot Frequency
47 to 1002 MHz
Backup Low Pilot Level
85 to 120 dBV
Temperature Back Off
-20, -10, 0, 10, 20, 30, 40, 50,
60 or AUTO degC
Monitor Frequency 0
47 to 1002 MHz
Monitor Frequency 1
47 to 1002 MHz
Monitor Frequency 2
47 to 1002 MHz
Monitor Frequency 3
47 to 1002 MHz
Monitor Frequency 4
47 to 1002 MHz
Monitor Frequency 5
47 to 1002 MHz
Monitor Frequency 6
47 to 1002 MHz
Monitor Frequency 7
47 to 1002 MHz
Monitor Frequency 8
47 to 1002 MHz
Monitor Frequency 9
47 to 1002 MHz