Cisco ASA 5506W-X

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5
Follow the instructions to complete the driver installation.
Step 6
To communicate with the ASA, start a terminal emulator application. This software should be configured with the
following parameters:
•
9600 baud
•
8 data bits
•
no parity
•
1 stop bit
•
no flow control
Connect to the Console Port with Mac OS X
Follow these steps to connect a Mac OS X system USB port to the console using the built in OS X Terminal
utility, or alternatively you can use a separate terminal emulator application.
Step 1
Use the Finder to go to Applications > Utilities > Terminal.
Step 2
Connect the OS X USB port to the ASA.
Step 3
Enter the following commands to find the OS X USB port number:
Example:
macbook:user$ cd /dev
macbook:user$ ls -ltr /dev/*usb*
crw-rw-rw- 1 root wheel 9, 66 Apr 1 16:46 tty.usbmodem1a21
DT-macbook:dev user$
Step 4
Connect to the USB port with the following command followed by the ASA USB port speed:
Example:
macbook:user$ screen /dev/tty.usbmodem1a21 9600
Step 5
Enter Ctrl-z followed by Ctrl-\ to disconnect the OS X USB console from the Terminal window.
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
42 Online Only
Mount and Connect
Connect to the Console Port with Mac OS X