Cisco ASA 5508-X User Manual

DescriptionLED
Status of the failover pair:
• Green—Failover pair operating normally.
• Unlit—Failover is not operational.
Status of a high-availability (HA) pair:
• Green—The active-mode unit.
• Amber—The standby unit.
Role of a standalone device:
• Green —The device is active normally.
Active
SSD LED behavior at first customer ship:
• Unlit—No SSD present.
• Green—SSD installed.
SSD LED behavior after June 2017:
• Unlit—No SSD present or no activity on the SSD.
• Green—Activity on the SSD.
See Remove and Replace the SSD for information on replacing a failed
SSD.
Note
SSD
Network Port Status
On the rear panel, a pair of LEDs (Link status and Connection status) for each of the eight Gigabit Ethernet
network ports, and the Gigabit Ethernet Management port.
Link status (L):
• Unlit—No link, or port is not in use.
• Green—Link established.
• Green, flashing—Link activity.
Connection-speed status (S):
• One blink every three seconds—10 Mbps.
• Two rapid blinks—100 Mbps.
• Three rapid blinks—1000 Mbps.
Overview
5
Overview
LEDs

Cisco ASA 5508-X Specifications

General

Maximum VPN Sessions	250
Power Supply	Internal
IPsec VPN Throughput	250 Mbps
USB 2.0	1
Memory	4 GB
Flash Memory	8 GB
AC Input	100-240 VAC
VPN Throughput	250 Mbps
Maximum VLANs	100
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Ports	8 x 1GE
Security Contexts	2
New Connections per Second	20, 000
Management Interface	1 x GE
Frequency	50-60 Hz
New Sessions per Second	20, 000
Humidity	5% to 95% non-condensing