Cisco ASA 5512-X Configuration Guide

3-22
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 3 Access Control Lists
History for ACLs
Unified extended and webtype ACLs for IPv4
and IPv6
9.0(1) Extended and webtype ACLs now support IPv4 and IPv6
addresses. You can even specify a mix of IPv4 and IPv6
addresses for the source and destination. The any keyword
was changed to represent IPv4 and IPv6 traffic. The any4
and any6 keywords were added to represent IPv4-only and
IPv6-only traffic, respectively. The IPv6-specific ACLs are
deprecated. Existing IPv6 ACLs are migrated to extended
ACLs. See the release notes for more information about
migration.
We modified the following commands: access-list
extended, access-list webtype.
We removed the following commands: ipv6 access-list,
ipv6 access-list webtype, ipv6-vpn-filter.
Extended ACL and object enhancement to filter
ICMP traffic by ICMP code
9.0(1) ICMP traffic can now be permitted/denied based on ICMP
code.
We introduced or modified the following commands:
access-list extended, service-object, service.
Configuration session for editing ACLs and
objects.
Forward referencing of objects and ACLs in
access rules.
9.3(2) You can now edit ACLs and objects in an isolated
configuration session. You can also forward reference
objects and ACLs, that is, configure rules and access groups
for objects or ACLs that do not yet exist.
We introduced the clear configuration session, clear
session, configure session, forward-reference, and show
configuration session commands.
Feature Name Releases Description

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs