Cisco ASA 5515-X Easy Setup Guide

To configure the ASA, use the Cisco Adaptive Security Device Manager (ASDM).
Follow these steps to download the Cisco ASDM from the ASA and install it to your
PC.
1
2
1
Launch a Web browser PC
and enter the IP address

https://192.168.1.1

into the address bar, then
press Enter key.
Depending on your environ-
ment, the security certificate
page appears.
2
Click
［
Continue to this
website (not recommend-
ed)
］
.
The Cisco ASDM web page ap-
pears.
Installing ASDM
2
3
4
5
3
Click [Install ASDM
Launcher].
Depending on your environ-
ment, the authentication dialog
box appears.
4
Click [OK].
Leave the username and pass-
word fields empty.
5
Click [Run].
The InstallShield Wizard for
Cisco ASDM Launcher appears.
Caution
If the Cisco ASDM web page does not appear, make sure that:
・
The POWER LED and STATUS LED are solid green.
・
You
connect a straight-through cable to an Ethernet port on the ASA.
・
Any pop-up blockers or proxy settings on your browser are disabled and that any
wireless client is disabled on your PC or laptop.
・
Your PC settings use DHCP. The ASA acts as a DHCP server. If your PC has a static IP ad-
dress, temporarily configure your PC settings to use DHCP.
Cisco ASA with FirePOWER Services Easy Setup Guide
2
Installing ASDM

Cisco ASA 5515-X Specifications

General

Firewall Throughput	1.2 Gbps
Maximum Concurrent Sessions	250, 000
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Interfaces	6 x Gigabit Ethernet
IPsec VPN Throughput	200 Mbps
Memory	4 GB
Flash Memory	4 GB
Form Factor	1RU
IPS Throughput	250 Mbps
Concurrent Sessions	250, 000
Security Contexts	2
Power Supply	AC power supply (100-240V)