Cisco ASA 5515-X Easy Setup Guide

5
4
Click [Next].
You can enter the host name
and the domain name of the
ASA.
5
Select the appropriate op-
tion.
Configure the outside interface
of the ASA. If you use the ASA

behind

the existing router,
select [Use DHCP] in most cas-
es. If you use the ASA

instead
of

the existing router, follow the
configuration of the router.
6
Click [Next].
8
Click [Next].
You can specify static routes if
your network has multiple rout-
ers.
6
4
7
Click [Next].
8
7
Caution
To the inside interfaces, you
must assign the range of IP
addresses different from the
range assigned to the outside
interface. For example, if the
outside range is 192.168.1.x,
the inside range should be
192.168.10.x, and so on. You
can change the range by se
-
lecting an interface and clicking
[Edit].
Cisco ASA with FirePOWER Services Easy Setup Guide
3
Configuring ASA

Cisco ASA 5515-X Specifications

General

Firewall Throughput	1.2 Gbps
Maximum Concurrent Sessions	250, 000
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Interfaces	6 x Gigabit Ethernet
IPsec VPN Throughput	200 Mbps
Memory	4 GB
Flash Memory	4 GB
Form Factor	1RU
IPS Throughput	250 Mbps
Concurrent Sessions	250, 000
Security Contexts	2
Power Supply	AC power supply (100-240V)