Cisco ASA 5515-X

3-1 Launching ASDM
Now you can launch the Cisco ASDM with the Cisco ASDM Launcher.
1
2
3
1
Click [OK.]
Leave the username and pass-
word fields empty. The Security
warning appears.
2
Click [Continue
］
.
3
Click [Cancel
］
.
The main ASDM window ap-
pears.
Configuring ASA
3
3-2 Launching Startup Wizard
After launching ASDM, use the Startup Wizard to perform initial configuration.
1
2
1
Click [Startup Wizard] from
the [Wizards] menu bar.
2
Click [Modify existing con-
figuration].
3
Click [Next].
MEMO
At step
❸
, you are prompted to provide the IP address of the ASA FirePOWER module. You can
later set the module IP address to the correct IP address using the Startup Wizard.
3
Cisco ASA with FirePOWER Services Easy Setup Guide
3
Configuring ASA