26-12
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 26 Information About NAT
NAT in Routed and Transparent Mode
Figure 26-11 shows a typical identity NAT scenario.
Figure 26-11 Identity NAT
NAT in Routed and Transparent Mode
You can configure NAT in both routed and transparent firewall mode. This section describes typical
usage for each firewall mode and includes the following topics:
• NAT in Routed Mode, page 26-13
• NAT in Transparent Mode, page 26-13
209.165.201.1 209.165.201.1
Inside Outside
209.165.201.2 209.165.201.2
130036
Security
Appliance
To Next Page
Loading...
