Cisco ASA 5540

11-7
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 11 Scenario: SSL VPN Clientless Connections
Implementing the Clientless SSL VPN Scenario
Specifying the SSL VPN Interface
In Step 2 of the SSL VPN Wizard, perform the following steps:
Step 1 Specify a Connection Name to which remote users connect.
Step 2 From the SSL VPN Interface drop-down list, choose the interface to which remote
users connect. When users establish a connection to this interface, the SSL VPN
portal page is displayed.
Step 3 From the Certificate drop-down list, choose the certificate the adaptive security
appliance sends to the remote user to authenticate the adaptive security appliance.