Cisco ASA 5540

6-9
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 6 Connecting Interface Cables on the ASA 5500, ASA 5510, ASA 5520, and ASA 5540 Platforms
Powering On the Adaptive Security Appliance
b. Connect the other end of the cable to a network device, such as a router,
switch, or hub.
Powering On the Adaptive Security Appliance
To power on the adaptive security appliance, perform the following steps:
Step 1 Connect the power cord to the adaptive security appliance and plug the other end
to the power source.
Step 2 Power on the chassis.
What to Do Next
Continue with Chapter 7, “Configuring the Adaptive Security Appliance.”