Cisco ASA 5540

11-9
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 11 Scenario: SSL VPN Clientless Connections
Implementing the Clientless SSL VPN Scenario
b. Choose a preconfigured server group from the Authenticate using an AAA
server group drop-down list, or click New to add a new AAA server group.
To create a new AAA Server Group, click New. The New Authentication
Server Group dialog box appears.
In this dialog box, specify the following:
– A server group name
– The Authentication Protocol to be used (TACACS, SDI, NT, Kerberos,
LDAP)
– IP address of the AAA server
– Interface of the adaptive security appliance
– Secret key to be used when communicating with the AAA server
Click OK.